Eletric Fencing Insulators

Safe Fence Polytape Insulators Safe-Fence Insulators for Vinyl sleeves or Wooden Posts. Made of impact resistant polyethylene, these insulators hold the tape tight to reduce wind vibration. Will accomodate all size tapes up to 1 1/2". Product Features: Use with Vinyl or Wood line posts Use with Tape up to 1 1/2" Mounting hardware NOT included Manufacturer recommends using Stainless Steel Screws Item Specifications: Size: 25 per Bag Material: Polyethylene « Read less

Safe Fence Polytape Insulators Safe-Fence Insulators for Vinyl sleeves or Wooden Posts. Made of impact resistant polyethylene, these insulators hold the tape tight to reduce wind vibration. Will accomodate all size tapes up to 1 1/2". Product Feature ...Read more »

Fit all 1 1/2" webbing. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy retightening if the webbing becomes too loose due to impact and allows easy re-tightening if the webbing becomes loose due to impace or stretching from snow and ice load. Tensioner swivels back and forth and rotate around the plastic insulated post bracket allowing for up and down grade changes which prevents the tape from bunching in the tensioner. 2 per pack. « Read less

Fit all 1 1/2" webbing. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy retightening if the webbing becomes too loose due to impact and allows easy re-tightening if the webbing becomes loos ...Read more »

This insulator clips onto steel tee-posts to hold webbing secure. For wood posts/vinyl sleeves, use stainless steel screws. Will hold up to 11/2" Polytape. Will fit 110, 125 and 133 posts very well. 91 and 101 are a little loose but will work. « Read less

This insulator clips onto steel tee-posts to hold webbing secure. For wood posts/vinyl sleeves, use stainless steel screws. Will hold up to 11/2" Polytape. Will fit 110, 125 and 133 posts very well. 91 and 101 are a little loose but will work.

Safe Fence Wide Tape Tensioner with Gate Hook Plate Combination of the Safe-Fence end tensioner and gate hook plate. Used to install tape or spring gates in new systems. 1 per pack. « Read less

Safe Fence Wide Tape Tensioner with Gate Hook Plate Combination of the Safe-Fence end tensioner and gate hook plate. Used to install tape or spring gates in new systems. 1 per pack.

Safe Fence T Post Cap Insulators 10 Pk Covers the top of T-Posts to prevent injury. Will fit most sizes of T-Posts. Holds polytape, electric rope, or polywire. Locks securely to keep wire from arcing. Impact resistant. Product Features: Impact resistant Keeps wire from arcing Helps prevent injury Item Specifications: Fits up 1.5" Polytape Fits most sizes of T-Posts Size: Each cap measures 3"H x 3"W x 7" round (6" on the inside). « Read less

Safe Fence T Post Cap Insulators 10 Pk Covers the top of T-Posts to prevent injury. Will fit most sizes of T-Posts. Holds polytape, electric rope, or polywire. Locks securely to keep wire from arcing. Impact resistant. Product Features: Impact resist ...Read more »

Powerfields Wood Post Claw Insulator Constructed of UV stabilized polyethylene, these high strength wood post insulators will stand up to abuse. Use with twisted or braided rope, Poly Coats, and High tensile wire up to 3/8" in diameter. Design allows material to slide upon impact. Offset design and flash shields prevent arcing to the post. Item Specifications: Size: 25 pack « Read less

Powerfields Wood Post Claw Insulator Constructed of UV stabilized polyethylene, these high strength wood post insulators will stand up to abuse. Use with twisted or braided rope, Poly Coats, and High tensile wire up to 3/8" in diameter. Design allows ...Read more »

Fits all 1 1/2" webbing. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy retightening, if the webbing becomes too loose due to impact or stretching from snow and ice load. Tensioner swivels back and forth and rotates around the plastic insulated post bracket, allowing for up and down grade changes which prevents the tape from bunching in the tensioner. 2 per pack. « Read less

Fits all 1 1/2" webbing. The stainless steel triangular tensioner holds the webbing tight, deters tearing from impact and allows easy retightening, if the webbing becomes too loose due to impact or stretching from snow and ice load. Tensioner swivels ...Read more »

Powerfields T-Post Claw Insulator This high-strength T-Post Claw Insulator from Powerfields allows coated wire or hot rope to slide through easily and helps prevent abrasion. Features: Made with high-density polyethylene Wraparound 3-point contact design attaches securely to standard t-posts Offset design and flash shields prevent arcing to the post Holds securely Resists heat, cold, moisture Accommodates up to 3/8" material Comparable to the R-CW25 Wood Post insulator Item Specifications: Size: 25 Count « Read less

Powerfields T-Post Claw Insulator This high-strength T-Post Claw Insulator from Powerfields allows coated wire or hot rope to slide through easily and helps prevent abrasion. Features: Made with high-density polyethylene Wraparound 3-point contact de ...Read more »

Powerfields Portable Corral Powerfields corral in a bag! This creates a 50' square area with 200' of Powerfields 1" polytape on a lockable rewind reel. The webbing is secured on eight 2-piece treaded posts and powered by The Trail 2 D-Cell Fence Charger. The kit also contains four corner tie-downs, adjustable insulators, a ground rod and installation instructions. Comes in a rugged 24" carry bag that is easy to pack. Product Features: Easy to transport Make 50' x 50' corral Item Specifications: Kit Includes: 1- 200 ft roll of 1" Powerfields Polytape 1- The Trail Energizer 2-D Cell Fence Charger 1- Lockable Rewind Reel 8- 2 piece treaded posts 4 - Tie downs 1- 24" Carrying bag « Read less

Powerfields Portable Corral Powerfields corral in a bag! This creates a 50' square area with 200' of Powerfields 1" polytape on a lockable rewind reel. The webbing is secured on eight 2-piece treaded posts and powered by The Trail 2 D-Cell Fence Char ...Read more »

Field Guardian(R) Pipe Clamp Insulators (12-Packs) Install this insulator and get your horses' respect by mounting a scare wire. Our special insulator attaches to the side of your pipe panels without drilling a hole in the pipe. The clamp can be mounted on the horizontal or vertical section of the panel. The hot wire can be positioned as needed, a point midway up is preferred, although stallions may need a high wire to keep them from "necking" over the fence. Place it on both sides of adjoining pastures to reduce horse mischief to a minimum. We strongly suggest using polyrope or 1/2" tape to prevent injuries caused by hot wire. These insulators are an economical and practical way to protect your pipe panel fences. Sizes and specifications The pipe clamp insulators are 3.5" inches in length and they adjust for pipe diameters from 1 1/2" up to 1 5/8". (In order to make them fit 1 7/8" pipes, you will need to get 1.5" screws - not included in these). These sizes should fit most pipe panels, heavy duty fences as well as some cyclone fence posts. The pipe clamps are constructed of a high grade of poly plastic with UV inhibiters and flex agents added. This means that they will last for years without cracking; however, this also means that they cost a bit more than T-post style snap on insulators. Installation Instructions Select the location for the insulator. Snap the clamp over the pipe. If you are using the clamp on small diameter pipe, use the short screw in the top hole. If you are using it on a 1 7/8" pipe, use the longer screw in the bottom hole. Tighten the screw to fix the position on the pipe. Do not over-tighten. « Read less

Field Guardian(R) Pipe Clamp Insulators (12-Packs) Install this insulator and get your horses' respect by mounting a scare wire. Our special insulator attaches to the side of your pipe panels without drilling a hole in the pipe. The clamp can be moun ...Read more »

Zareba 4ft Step In Poly Post Each Quickly set up fencing in any outdoor area with these step-in poly posts. Posts feature a step-in flange with anti-rotation spike to secure it in the ground as well as 8 clips that are big enough to hold up to 2 inch poly tape. To install, just set up your fence perimeter with the step-in posts and then run your fence line between them. Posts can also be sued to set up perimeters for crowd control, construction zones or property marking. Step-in posts can also hold decorations or serve as vegetables or plant stakes. Constructed of durable polypropylene and steel, these posts will last and can be easily installed and removed. Clips are set at following height(measured from top of the step-in flange): 5 in, 9.5 in, 12.5 in, 17.45 in, 21.45 in, 26.75 in, 30.10 in, 35.25in. Features: Heavy-duty step in post (39 inches exposed above ground) Clips hold electric fence wire or poly tape up to 2 inches wide Molded from reinforced polypropylene with a heavy duty steel stake Large step-in flange and anti-rotation spike to keep stake from turning Use for gardening, boundary line marking, crowd control or more Item Specifications: Color: White Height: 4 feet (39 inches above ground) Material: Polypropylene/ Steel spike « Read less

Zareba 4ft Step In Poly Post Each Quickly set up fencing in any outdoor area with these step-in poly posts. Posts feature a step-in flange with anti-rotation spike to secure it in the ground as well as 8 clips that are big enough to hold up to 2 inch ...Read more »

Powerfields No-Cut Online Tightener For Rope This powder coated white aluminum tightener is best used with light gauge wire or rope. Not to be used with coated wire. Installation does not require disconnecting the fence. 1/2" drive ratchet is suitable for tightening. Features: Powder coated, aluminum Fence does not have to be disconnected « Read less

Powerfields No-Cut Online Tightener For Rope This powder coated white aluminum tightener is best used with light gauge wire or rope. Not to be used with coated wire. Installation does not require disconnecting the fence. 1/2" drive ratchet is suitabl ...Read more »

Powerfields Hot Rope Corner/End Lag Pulley High strength insulator to use on end runs and to turn corners. Use with Hot Rope, Braid, Wire, Poly-Coat, Hot-Coat, and polywire. Only use with wood posts and heavy duty rust resistant lag and UV resistant polyethylene insulators. Item Specifications: Size: 4 pack Color: White « Read less

Powerfields Hot Rope Corner/End Lag Pulley High strength insulator to use on end runs and to turn corners. Use with Hot Rope, Braid, Wire, Poly-Coat, Hot-Coat, and polywire. Only use with wood posts and heavy duty rust resistant lag and UV resistant ...Read more »

Powerfields Heavy Duty Pin Lock Wood Post Insulator A tough Pin Lock insulator designed to hold up to 3/8" diameter ropes, polywire, smooth and high tensile wire to wood or vinyl posts. The pin locks the material securely in the insulator. Made of UV-stabilized polyethylene. Pack of 25. Made in the USA. « Read less

Powerfields Heavy Duty Pin Lock Wood Post Insulator A tough Pin Lock insulator designed to hold up to 3/8" diameter ropes, polywire, smooth and high tensile wire to wood or vinyl posts. The pin locks the material securely in the insulator. Made of UV ...Read more »

Zareba Slant Nail Insulator Designed for use with wooden posts, this insulator extends the wire 2 1/2" from the posts without losing energy through the post. Features: For use with Wooden posts Use with 9 gauge through 22 gauge highi-tensil steel wire and aluminum wire Use with polywire (Both regular and heavy-duty) and polyrope up to 1/4" diamete Extends the wire 1 1/2" from the wooden post Comes with double-headed nail 25 insulators per bag Item Specifications: Color: Yellow « Read less

Zareba Slant Nail Insulator Designed for use with wooden posts, this insulator extends the wire 2 1/2" from the posts without losing energy through the post. Features: For use with Wooden posts Use with 9 gauge through 22 gauge highi-tensil steel wir ...Read more »

Powerfields In Line Tensioner for Polywire/Tape This high-strength plastic ratchet tensioner is for use on polywire and polytape up to 1" wide. Material does not need to be cut to tension it. Simply slide it in and turn for tension. 4 per pack. Features: High-strength plastic For use up 1" polytape or polywire « Read less

Powerfields In Line Tensioner for Polywire/Tape This high-strength plastic ratchet tensioner is for use on polywire and polytape up to 1" wide. Material does not need to be cut to tension it. Simply slide it in and turn for tension. 4 per pack. Featu ...Read more »

Powerfields Pin-Lock T-Post Insulator Durable insulator designed to hold ropes, braids and polywire up to 3/8", as well as coated, smooth, or high tensile wire. The large flash shield and offset prevents arcing. Made of high-density polyethylene. Wrap around back bar of the T-post; no hardware needed! Item Specification: Size: 25 Pack « Read less

Powerfields Pin-Lock T-Post Insulator Durable insulator designed to hold ropes, braids and polywire up to 3/8", as well as coated, smooth, or high tensile wire. The large flash shield and offset prevents arcing. Made of high-density polyethylene. Wra ...Read more »

Fi-Shock (R) Yellow Snap-On 2" Extender T-Post Insulator Best used for fastening electrified wire to posts. Fits securely on standard (1.25 or 1.33) studded T-posts. It is fabricated as one molded piece, so it needs no hardware. Features: Use with Wire Fits securely on standard (1.25 or 1.33) studded T-post One molded piece - needs no hardware Color: Yellow 25 per bag « Read less

Fi-Shock (R) Yellow Snap-On 2" Extender T-Post Insulator Best used for fastening electrified wire to posts. Fits securely on standard (1.25 or 1.33) studded T-posts. It is fabricated as one molded piece, so it needs no hardware. Features: Use with Wi ...Read more »

Wood Post Ring Insulator for Rope Screw-in type doughnut insulator for wood posts, used as a beginning and end insulator, as well as all sections on the rest of your fence. This insulator can be used with rope, polywire, metal wire, etc. Do not use with polytape. Made from durable UV resistant plastic with a Zinc-coated wood screw. 25 Pack. « Read less

Wood Post Ring Insulator for Rope Screw-in type doughnut insulator for wood posts, used as a beginning and end insulator, as well as all sections on the rest of your fence. This insulator can be used with rope, polywire, metal wire, etc. Do not use w ...Read more »

Wood Post Polytope Corner Insulator Molded of heavy-duty white polyethylene with UV inhibitors. Insulator is for use at corners, ends, or T-junctions. For use for standard T-posts (1.25 and 1.33 t-posts). Features: For Standard T-posts For all poly-tape widths up to 2 inches Use at corners, ends, or T-junctions Fully insulated All metal parts are stainless steel « Read less

Wood Post Polytope Corner Insulator Molded of heavy-duty white polyethylene with UV inhibitors. Insulator is for use at corners, ends, or T-junctions. For use for standard T-posts (1.25 and 1.33 t-posts). Features: For Standard T-posts For all poly-t ...Read more »

Fi-Shock(R) Yellow Corner Post Insulator Made of thick, tough plastic that can withstand the strain of wire on your electrified fences. Fastens electrified wire to round or square fence corner post without losing energy. Features: Use with 9 gauge through 22 gauge high-tensile steel wire and aluminum wire Use with polywire (both regular and heavy duty), and polyrope up to 1/4" in diameter Can be used on chain link fence Color: Yellow 10 per bag « Read less

Fi-Shock(R) Yellow Corner Post Insulator Made of thick, tough plastic that can withstand the strain of wire on your electrified fences. Fastens electrified wire to round or square fence corner post without losing energy. Features: Use with 9 gauge th ...Read more »

Powerfields Polywire Corner/End Lag Pulley A medium-duty, rust resistant lag and UV-resistant polyethylene corner and end post insulator for polywire. This 4-pack is designed for use on wood posts only. Note: Due to manufacturing rolling changes for improvements, this product may look different than showing on the website. Also colors may vary between white or black. Features: Medium-duty corner and end post insulator For use on wood posts only Item Specifications: Color: White or Black (color may vary) Size: 4-pack « Read less

Powerfields Polywire Corner/End Lag Pulley A medium-duty, rust resistant lag and UV-resistant polyethylene corner and end post insulator for polywire. This 4-pack is designed for use on wood posts only. Note: Due to manufacturing rolling changes for ...Read more »

Zareba Polytape Wood Post Insulator Molded of heavy-duty polyethylene and has a large flange to prevent arcing. This white insulator extends the tape 2" from the post. These electric fence insulators are packed 25 per bag, including nails and a tape holder which unlocks for easy installation. Features: Tape holder locks/unlocks for easy installation of wire and polytape Extends the tape 2" from the post 25 insulators per bag Comes with double-headed nails Item Specifications: Color: White « Read less

Zareba Polytape Wood Post Insulator Molded of heavy-duty polyethylene and has a large flange to prevent arcing. This white insulator extends the tape 2" from the post. These electric fence insulators are packed 25 per bag, including nails and a tape ...Read more »

Zareba T-Post Safety Cap & Insulator Sharp-edged T-post tops can be dangerous to your horses and livestock, causing injury to the animals and expensive veterinary bills for you. These caps help protect animals from the sharp-edged T-post tops. Fit on 1.25 and 1.33 T-posts and accommodate any gauge wire. Features: For use with any gauge wire 10 per bag T-post safety cap and insulator for 1.25 and 1.33 T-posts Item Specifications: Color: Yellow « Read less

Zareba T-Post Safety Cap & Insulator Sharp-edged T-post tops can be dangerous to your horses and livestock, causing injury to the animals and expensive veterinary bills for you. These caps help protect animals from the sharp-edged T-post tops. Fit on ...Read more »

Wood Post Wide Tape Corner/End Strain Insulator « Read less

Wood Post Wide Tape Corner/End Strain Insulator

Zareba Duralator Wood Post Self Drilling Insulator Designed for use with wood posts and can be used with a variety of different wire types. Large, self drilling, screw-in porcelain-looking insulator allows you to fasten electrified wire to wood posts without losing energy through the post. Product Features: Designed for use with wood posts Quick and easy to install Installs with or withour power tools Should not break Item Specifications: Color: White Material: Polyethylene Plastic Use with: Steel wire Aluminum wire Polyrope Polywire High tensile wire « Read less

Zareba Duralator Wood Post Self Drilling Insulator Designed for use with wood posts and can be used with a variety of different wire types. Large, self drilling, screw-in porcelain-looking insulator allows you to fasten electrified wire to wood posts ...Read more »

Field Guardian Round Post Insulator-Polywire/Wire Insulator for wire and 1/4" polyropes with a strong, easy to grip attachment ring with uniform threads for quick and easy installation. Fits round posts up to 14mm in diameter ( .55") or can be nailed to a wood post. 25 pack. Features: Insulator for wire and 1/4" polyropes Strong, easy to grip attachment ring « Read less

Field Guardian Round Post Insulator-Polywire/Wire Insulator for wire and 1/4" polyropes with a strong, easy to grip attachment ring with uniform threads for quick and easy installation. Fits round posts up to 14mm in diameter ( .55") or can be nailed ...Read more »

Use with poly wire, poly rope and steel/aluminum wire. Color: Yellow Size: 25 Pack « Read less

Use with poly wire, poly rope and steel/aluminum wire. Color: Yellow Size: 25 Pack