Personalized Riding Gear

Personalized Leather Bracelet With ID Plate by The Engraver This beautifully crafted leather bracelet includes an ornamental plate that you can personalize with one line of text. The bracelet is one-size-fits-most, with five holes for an adjustable fit and a solid brass or nickel buckle, plus a satin brass or nickel plate lacquered for protection. Makes a wonderful keepsake or gift! Features: Leather bracelet includes plate to be personalized One size fits most Made in the USA Please note: This item requires personalization. Personalized items cannot be returned. Item Specifications: Dimensions: Width of leather: 1/2" Overall length of leather only: approx. 93/4" Overall length of bracelet including buckle: approx. 101/4" Personalized plate size: 3/8"W x 21/2"L Care & Feeding of Your Personalized Leather Bracelet With ID Plate Courtesy of the Engraver Like all lacquered metals, brass (and nickel) must be maintained to continue looking like new. Just like your car, the lacquer will discolor and corrode if you don't wash and wax it. Since brass is such a soft metal, it can start to deteriorate very quickly depending upon where you are, sometimes within forty-eight hours. Maintaining your nameplates, however, is relatively simple. First and foremost, keep all corrosives off your nameplates. Corrosives include, but are not limited to: sweat, saliva, salt, insecticides, soap, dirt, and all the interesting chemicals people insist on putting on leather equipment. And never, ever use an abrasive cleaner or polish on a lacquered brass surface. These include household cleaners like Comet and metal polishes like Brasso. Here's something that some people don't want you to hear - there are only three things you need to maintain any type of leather: glycerine saddle soap, oil, and wax. That's all you need, and all that should be used. Wood cleaners, multi-purpose cleaners and solvents should never be used on leather. "Proper" care of leather would be to clean it with saddle soap after every use, oil it once a week, and polish it several times a year. We all do that, don't we? At the very least, you should clean your leather when it gets dirty and oil it a few times each year. Polishing leather seems to be reserved only for riding boots and fine harnesses these days. No matter what you do, however, you can't leave any of these materials on your nameplates - they will corrode and discolor the lacquer. We can tell you what type of cleaner you've been using just by what color the lacquer has turned. So, after you have cleaned and conditioned your leather, and wiped residue off your plates, what do you do? You wipe off your brass plates with either dish soap and car wash, then you wax it. Use non-abrasive automotive wax, the same type you use on your car. It doesn't matter what type you use, but the better wax you get, the better it works. You can also use a neutral leather shoe polish. Apply it every time you clean your leather, or at least four times a year. Most of all keep your plates dry. Nothing will destroy a lacquered brass finish like any type of liquid left standing on the surface, including water. When you receive your nameplates, they are not waxed. That should be one of the first things you do. Just as with your car, if you live in an area where there is high salt or pollution content in the air, you will have to clean and wax your plates more often. A little time and effort will keep your nameplates looking new for a long time. « Read less

Personalized Leather Bracelet With ID Plate by The Engraver This beautifully crafted leather bracelet includes an ornamental plate that you can personalize with one line of text. The bracelet is one-size-fits-most, with five holes for an adjustable f ...Read more »

Personalized Leather Key Fob With ID Plate by The Engraver Carry your keys on a beautiful, rich, dark brown leather key fob that includes a personalized plate in heavyweight glossy brass, lacquered for protection, and a brass split ring. Features: Rich, dark brown leather key fob Glossy brass plate Personalization includes one line of text Made in the U.S.A. Item Specifications: Dimensions: Overall size of leather: 3/4"W x 33/4"L Personalized plate size: 1/2"W x 21/2"L Split ring diameter: approx. 11/4" Care & Feeding of Your Personalized Leather Key Fob With ID Plate Courtesy of The Engraver Like all lacquered metals, brass (and nickel) must be maintained to continue looking like new. Just like your car, the lacquer will discolor and corrode if you don't wash and wax it. Since brass is such a soft metal, it can start to deteriorate very quickly depending upon where you are, sometimes within forty-eight hours. Maintaining your nameplates, however, is relatively simple. First and foremost, keep all corrosives off your nameplates. Corrosives include, but are not limited to: sweat, saliva, salt, insecticides, soap, dirt, and all the interesting chemicals people insist on putting on leather equipment. And never, ever use an abrasive cleaner or polish on a lacquered brass surface. These include household cleaners like Comet and metal polishes like Brasso. Here's something that some people don't want you to hear - there are only three things you need to maintain any type of leather: glycerine saddle soap, oil, and wax. That's all you need, and all that should be used. Wood cleaners, multi-purpose cleaners and solvents should never be used on leather. "Proper" care of leather would be to clean it with saddle soap after every use, oil it once a week, and polish it several times a year. We all do that, don't we? At the very least, you should clean your leather when it gets dirty and oil it a few times each year. Polishing leather seems to be reserved only for riding boots and fine harnesses these days. No matter what you do, however, you can't leave any of these materials on your nameplates - they will corrode and discolor the lacquer. We can tell you what type of cleaner you've been using just by what color the lacquer has turned. So, after you have cleaned and conditioned your leather, and wiped residue off your plates, what do you do? You wipe off your brass plates with either dish soap and car wash, then you wax it. Use non-abrasive automotive wax, the same type you use on your car. It doesn't matter what type you use, but the better wax you get, the better it works. You can also use a neutral leather shoe polish. Apply it every time you clean your leather, or at least four times a year. Most of all, keep your plates dry. Nothing will destroy a lacquered brass finish like any type of liquid left standing on the surface, including water. When you receive your nameplates, they are not waxed. That should be one of the first things you do. Just as with your car, if you live in an area where there is high salt or pollution content in the air, you will have to clean and wax your plates more often. A little time and effort will keep your nameplates looking new for a long time. « Read less

Personalized Leather Key Fob With ID Plate by The Engraver Carry your keys on a beautiful, rich, dark brown leather key fob that includes a personalized plate in heavyweight glossy brass, lacquered for protection, and a brass split ring. Features: Ri ...Read more »

Personalized Green Hill Cordura Leather Tote Have you ever wanted that one bag you could throw everything into and not worry about it all falling through the bottom? That one bag you could use as a carry-all for your carry-on at the airport? A bag that can hold anything from your paddock boots to your laptop computer? This beautifully crafted, extra large Cordura and leather tote includes an ornamental plate that you can personalize with one line of text. The satin brass plate is lacquered for protection. The top of the bag closes with a zipper closure. It has a large, open outer pocket, one large inner pocket that closes with a zipper, two smaller pockets that close with Velcro, and a clip near the top on the inside for your keys. The padded handles on the bag are large enough to slide over your shoulder. It makes a wonderful keepsake or the perfect gift! Features: Tote includes plate to be personalized Short non detachable handle (side rings are for decor; there is not a cross body strap) One size Made in the U.S.A Please note: This item requires personalization. Personalized items cannot be returned. Item Specifications: Dimensions: 16" tall, 14" wide, 7" deep Care Courtesy of The Engraver Like all lacquered metals, brass (and nickel) must be maintained to continue looking like new. Just like your car, the lacquer will discolor and corrode if you don't wash and wax it. Since brass is such a soft metal, it can start to deteriorate very quickly depending upon where you are, sometimes within forty-eight hours. Maintaining your nameplates, however, is relatively simple. First and foremost, keep all corrosives off your nameplates. Corrosives include, but are not limited to: sweat, saliva, salt, insecticides, soap, dirt, and all the interesting chemicals people insist on putting on leather equipment. And never, ever use an abrasive cleaner or polish on a lacquered brass surface. These include household cleaners like Comet and metal polishes like Brasso. Here's something that some people don't want you to hear - there are only three things you need to maintain any type of leather: glycerine saddle soap, oil, and wax. That's all you need, and all that should be used. Wood cleaners, multi-purpose cleaners and solvents should never be used on leather. "Proper" care of leather would be to clean it with saddle soap after every use, oil it once a week, and polish it several times a year. We all do that, don't we? At the very least, you should clean your leather when it gets dirty and oil it a few times each year. Polishing leather seems to be reserved only for riding boots and fine harnesses these days. No matter what you do, however, you can't leave any of these materials on your nameplates - they will corrode and discolor the lacquer. We can tell you what type of cleaner you've been using just by what color the lacquer has turned. So, after you have cleaned and conditioned your leather, and wiped residue off your plates, what do you do? You wipe off your brass plates with either dish soap and car wash, then you wax it. Use non-abrasive automotive wax, the same type you use on your car. It doesn't matter what type you use, but the better wax you get, the better it works. You can also use a neutral leather shoe polish. Apply it every time you clean your leather, or at least four times a year. Most of all, keep your plates dry. Nothing will destroy a lacquered brass finish like any type of liquid left standing on the surface, including water. When you receive your nameplates, they are not waxed. That should be one of the first things you do. Just as with your car, if you live in an area where there is high salt or pollution content in the air, you will have to clean and wax your plates more often. A little time and effort will keep your nameplates looking new for a long time. « Read less

Personalized Green Hill Cordura Leather Tote Have you ever wanted that one bag you could throw everything into and not worry about it all falling through the bottom? That one bag you could use as a carry-all for your carry-on at the airport? A bag th ...Read more »

Padded Leather ID Bracelet by The Engraver This beautifully crafted leather bracelet includes The Engraver's Ornamental Plate that you can personalize with one line of text. The bracelet is one-size-fits-most, with four holes for an adjustable fit, and the plate is lacquered for protection. Features: Leather bracelet includes plate that can be personalized Plate is lacquered for protection Brass or nickel hardware; see below One size fits most Made in the USA Please note: This item requires personalization. Personalized items cannot be returned. Item Specifications: Brass hardware included on: Brown Leather/Brown Leather Pad Brown Leather/Metallic Gold Leather Pad Chestnut Leather/Brown Leather Pad Chestnut Leather/Green Leather Pad Chestnut Leather/Navy Leather Pad Chestnut Leather/ Teal Leather Pad Green Leather/Metallic Gold Leather Pad Red Leather/Sparkly Red Leather Pad Nickel hardware included on: Black Leather/Black Leather Pad Black Leather/Metallic Purple Leather Pad Black Leather/Metallic Silver Leather Pad Black Leather/Teal Leather Pad Navy Blue Leather/ Devon Blue Leather Pad Navy Blue Leather/Pink Leather Pad Navy Blue Leather/Sparkly Blue Leather Pad Item Dimensions: Width of leather at widest point: 3/4" Overall length of leather only: approx. 9 1/2" Overall length of bracelet including buckle: approx. 10" Personalized plate size: 3/8"W x 2 1/2"L Care & Feeding of Your Padded Leather ID Bracelet Courtesy of the Engraver Like all lacquered metals, brass (and nickel) must be maintained to continue looking like new. Just like your car, the lacquer will discolor and corrode if you don't wash and wax it. Since brass is such a soft metal, it can start to deteriorate very quickly depending upon where you are, sometimes within forty-eight hours. Maintaining your nameplates, however, is relatively simple. First and foremost, keep all corrosives off your nameplates. Corrosives include, but are not limited to: sweat, saliva, salt, insecticides, soap, dirt, and all the interesting chemicals people insist on putting on leather equipment. And never, ever use an abrasive cleaner or polish on a lacquered brass surface. These include household cleaners like Comet and metal polishes like Brass. Here's something that some people don't want you to hear - there are only three things you need to maintain any type of leather: glycerine saddle soap, oil, and wax. That's all you need, and all that should be used. Wood cleaners, multi-purpose cleaners and solvents should never be used on leather. "Proper" care of leather would be to clean it with saddle soap after every use, oil it once a week, and polish it several times a year. We all do that, don't we? At the very least, you should clean your leather when it gets dirty and oil it a few times each year. Polishing leather seems to be reserved only for riding boots and fine harnesses these days. No matter what you do, however, you can't leave any of these materials on your nameplates - they will corrode and discolor the lacquer. We can tell you what type of cleaner you've been using just by what color the lacquer has turned. So, after you have cleaned and conditioned your leather, and wiped residue off your plates, what do you do? You wipe off your brass plates with either dish soap and car wash, then you wax it. Use non-abrasive automotive wax, the same type you use on your car. It doesn't matter what type you use, but the better wax you get, the better it works. You can also use a neutral leather shoe polish. Apply it every time you clean your leather, or at least four times a year. Most of all, keep your plates dry. Nothing will destroy a lacquered brass finish like any type of liquid left standing on the surface, including water. When you receive your nameplates, they are not waxed. That should be one of the first things you do. Just as with your car, if you live in an area where there is high salt or pollution content in the air, you will have to clean and wax your plates more often. A little time and effort will keep your nameplates looking new for a long time. « Read less

Padded Leather ID Bracelet by The Engraver This beautifully crafted leather bracelet includes The Engraver's Ornamental Plate that you can personalize with one line of text. The bracelet is one-size-fits-most, with four holes for an adjustable fit, a ...Read more »